COPPER BONDED PLATES

Copper bonded plate is manufactured from ISI Certified mild steel. Copper is molecularly bonded to Nickel sealed steel to avoid copper to steel merging. Bonding is done after all fabrication and drilling, so that no steel part is exposed, so it replace copper plate for earthing. Minimum 100- 250 microns copper coating thickness, used in low soil resistivity areas where fault current is very high.

Suitable for 11kv substations, generators and Industrial installations.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

COPPER BONDED ROD WITH STRIP

Copper bonding done after fabrication of Rod with Strip, And drilling holes.Two and four holes with SS bolt and nut are available. Used in Small/Large Industrial Installations and large Sub-stations.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

ROD WITH BOLT & NUT

Copper bonding done after drilling two holes provided with SS bolt and nut for efficient connection used in Domestic/Commercial /Industrial installation.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

TINNED COPPER BONDED ROD ELECTRODES

99.9% pure electrolytic quality copper is molecularly bonded to nickel sealed steel rod for a uniform thickness of 100/250 microns. Over this 20 microns of tin coating is applied to meet the recommends under IEC 61439 and. Tinned copper bonded rod ensure total protection from galvanic corrosion, Ideal for using in sea shore area and area, of low soil resistivity, suitable for Chemical industrial earthing and Electronic Equipment Earthing.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

COPPER BONDED MESH

Copper bonded Mesh is manufactured from ISI Certified mild steel strip. Copper is molecularly bonded to Nickel sealed steel Mesh to avoid copper to steel merging. Bonding is done after all fabrication and drilling so that no steel part is exposed -Minimum 100- 250 microns copper coating thickness. More economical than Pipe. Can be used as earth electrodes in lightning protection system,earthing of Generator,Electronic Equipment, PLC Controlled Equipment's and communication equipment earthing.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

TINNED COPPER BONDED ROD ELECTRODES

99.9% pure electrolytic quality copper is molecularly bonded to nickel sealed steel rod for a uniform thickness of 100/250 microns. Over this 20 microns of tin coating is applied to meet the recommends under IEC 61439 and. Tinned copper bonded rod ensure total protection from galvanic corrosion, Ideal for using in sea shore area and area, of low soil resistivity, suitable for Chemical industrial earthing and Electronic Equipment Earthing.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

COPPER BONDED ROD WITH STRIP

Copper bonding done after fabrication of Rod with Strip, And drilling holes.Two and four holes with SS bolt and nut are available. Used in Small/Large Industrial Installations and large Sub-stations.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

GALVANZED ION (G.I) EARTHING ELECTRODE:

We are Manufacturing pipe in solid rod Technology with high duty connecting terminal. The outer pipe wall thickness is 3.2mm in standard length of 3 Meter long. It is Manufactured in Mild steel pipe and it is hot dip galvanized to a Maximum up to 85-110 microns. We have Special Conducting mixture is filled inside the pipe. Thi Special Mixture allows fast conduction of any fault current or short Circuit current to earth.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

COPPER BONDED PLATES

Copper bonded plate is manufactured from ISI Certified mild steel. Copper is molecularly bonded to Nickel sealed steel to avoid copper to steel merging. Bonding is done after all fabrication and drilling, so that no steel part is exposed, so it replace copper plate for earthing. Minimum 100- 250 microns copper coating thickness, used in low soil resistivity areas where fault current is very high.

Suitable for 11kv substations, generators and Industrial installations.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

COPPER BONDED MESH

Copper bonded Mesh is manufactured from ISI Certified mild steel strip. Copper is molecularly bonded to Nickel sealed steel Mesh to avoid copper to steel merging. Bonding is done after all fabrication and drilling so that no steel part is exposed -Minimum 100- 250 microns copper coating thickness. More economical than Pipe. Can be used as earth electrodes in lightning protection system,earthing of Generator,Electronic Equipment, PLC Controlled Equipment's and communication equipment earthing.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

TINNED COPPER BONDED ROD ELECTRODES

99.9% pure electrolytic quality copper is molecularly bonded to nickel sealed steel rod for a uniform thickness of 100/250 microns. Over this 20 microns of tin coating is applied to meet the recommends under IEC 61439 and. Tinned copper bonded rod ensure total protection from galvanic corrosion, Ideal for using in sea shore area and area, of low soil resistivity, suitable for Chemical industrial earthing and Electronic Equipment Earthing.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

ROD WITH BOLT & NUT

Copper bonding done after drilling two holes provided with SS bolt and nut for efficient connection used in Domestic/Commercial /Industrial installation.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

COPPER BONDED ROD WITH STRIP

Copper bonding done after fabrication of Rod with Strip, And drilling holes.Two and four holes with SS bolt and nut are available. Used in Small/Large Industrial Installations and large Sub-stations.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

HOT DIPPED GALVANIZED RODS

Made of low carbon, high tensile strength steel rods hot dipping is done using special quality Zinc as per IS 4736/1986 SPEC. Can be directly driven to virgin soil- coating thickness 150 microns. No galvanic or bimetallic corrosion affects on underground steel structural works. Can be directly driven into earth by Hammering-end of rods does not crack. Corrosion rate of GI Rods is not more than 9.9 micro meter/year. Manufactured as per IEC Standard.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

STRIPS

We ensure the products are made in accordance with the international standards and also be customized according to customers' requirements about diameter, length and coating thickness.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

ISOLATION TRANSFORMER

An isolation transformer is a transformer used to provide galvanic isolation and are used to suppress electrical noise in sensitive devices, or to transfer power between two circuits which must not be connected. Since neutral is at Zero potential with the transformer, as there is no conductive connection between transformer, secondary and earth. Particularly useful on medical equipment's. ATM'S, PLC Control Equipments, Electronic Equipment Power Supply and Computers.Isolation transformercan be used to contain 3rd Harmonics current.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

CONCEPT OF EXCELERTHING COMPOUND

To improve earthing effectiveness, it is possible to increase the earths conductivity by enhancing its absorption power and increases its richness with charge carrying ions.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

EXCELERTHINGS manufacture and supply of Electrical Earthing Products- Earthing Electrodes and Earth Enhancing Compound. We keeps the approved standards and practices in the Earthing System. Selecting a single governing standard may not ensure sound practices for proper earthing because of the diversities found in local soil conditions and applications.

As a solution provider in electric world we offer reliable and cost effective products for grounding, Lightning protection and power quality concerns. We also provide online technical support to our customers, which effectively eliminates trial and error at the site. Hence reduces overall cost of grounding system implementation.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

Copper Bonded Pipe

Copper bonded pipes are manufactured from ISI Certified mild steel pipe. Copper is molecularly bonded to Nickel sealed steel pipe to avoid copper to steel merging. Bonding is done after all fabrication and drilling, so that no steel part is exposed act as a copper pipe. Minimum 100- 250 microns copper coating thickness suitable for sea-shore area. Employed in places where soil resistivity is very low, where G I pipes cannot be used because of corrosive nature of soil. Copper bonded pipes are efficient than GI Pipes.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com