HOT DIPPED GALVANIZED RODS

Made of low carbon, high tensile strength steel rods hot dipping is done using special quality Zinc as per IS 4736/1986 SPEC. Can be directly driven to virgin soil- coating thickness 150 microns. No galvanic or bimetallic corrosion affects on underground steel structural works. Can be directly driven into earth by Hammering-end of rods does not crack. Corrosion rate of GI Rods is not more than 9.9 micro meter/year. Manufactured as per IEC Standard.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com                                           

Website: www.excelearthings.com

ROD WITH BOLT & NUT

Copper bonding done after drilling two holes provided with SS bolt and nut for efficient connection used in Domestic/Commercial /Industrial installation.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

COPPER BONDED ROD WITH STRIP

Copper bonding done after fabrication of Rod with Strip, And drilling holes.Two and four holes with SS bolt and nut are available. Used in Small/Large Industrial Installations and large Sub-stations.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

COPPER BONDED EARTH ELECTRODES

Superior Quality - made of low carbon, high tensile strength steel rods-99.9% pure electrolytic quality copper is molecularly bonded to nickel coated steel rods ensuring greater performance and double protection 250 microns copper coating as required under UL 467 and IEEE spec - life span is excellent in corrosive soil. Current loading capacity is almost the same as plate earth.

State of the art manufacturing process helps ensure uniform Coating thickness

Copper is molecularly bonded to nickel sealed steel rod to avoid steel to copper merging.

Exceed the requirements of ANSI®/UL® 467, CSA, and IEC

Total rod is bonded hence no steel part is exposed.

Contact Us: 0487 – 2970255, +91 9446724551

Email: mail@excelearthings.com

Website: www.excelearthings.com

TINNED COPPER BONDED ROD ELECTRODES

99.9% pure electrolytic quality copper is molecularly bonded to nickel sealed steel rod for a uniform thickness of 100/250 microns. Over this 20 microns of tin coating is applied to meet the recommends under IEC 61439 and. Tinned copper bonded rod ensure total protection from galvanic corrosion, Ideal for using in sea shore area and area, of low soil resistivity,suitable for Chemical industrial earthing and Electronic Equipment Earthing.

Contact Us: 0487 – 2970255, +91 9446724551

Email: mail@excelearthings.com

Website: www.excelearthings.com

Copper Bonded Pipe

Made of low carbon, high tensile strength steel rods hot dipping is done using special quality Zinc as per IS 4736/1986 SPEC. Can be directly driven to virgin soil- coating thickness 150 microns. No galvanic or bimetallic corrosion affects on underground steel structural works. Can be directly driven into earth by Hammering-end of rods does not crack. Corrosion rate of GI Rods is not more than 9.9 micro meter/year. Manufactured as per IEC Standard.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

COPPER BONDED EARTH ELECTRODES

Superior Quality - made of low carbon, high tensile strength steel rods-99.9% pure electrolytic quality copper is molecularly bonded to nickel coated steel rods ensuring greater performance and double protection 250 microns copper coating as required under UL 467 and IEEE spec - life span is excellent in corrosive soil. Current loading capacity is almost the same as plate earth.

State of the art manufacturing process helps ensure uniform Coating thickness

Copper is molecularly bonded to nickel sealed steel rod to avoid steel to copper merging.

Exceed the requirements of ANSI®/UL® 467, CSA, and IEC

Total rod is bonded hence no steel part is exposed.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

ROD WITH BOLT & NUT

Copper bonding done after drilling two holes provided with SS bolt and nut for efficient connection used in Domestic/Commercial /Industrial installation.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

TINNED COPPER BONDED ROD ELECTRODES

99.9% pure electrolytic quality copper is molecularly bonded to nickel sealed steel rod for a uniform thickness of 100/250 microns. Over this 20 microns of tin coating is applied to meet the recommends under IEC 61439 and. Tinned copper bonded rod ensure total protection from galvanic corrosion, Ideal for using in sea shore area and area, of low soil resistivity, suitable for Chemical industrial earthing and Electronic Equipment Earthing.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

HOT DIPPED GALVANIZED RODS

Made of low carbon, high tensile strength steel rods hot dipping is done using special quality Zinc as per IS 4736/1986 SPEC. Can be directly driven to virgin soil- coating thickness 150 microns. No galvanic or bimetallic corrosion affects on underground steel structural works. Can be directly driven into earth by Hammering-end of rods does not crack. Corrosion rate of GI Rods is not more than 9.9 micro meter/year. Manufactured as per IEC Standard.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com

                                                

COPPER BONDED ROD WITH STRIP

Copper bonding done after fabrication of Rod with Strip, And drilling holes.Two and four holes with SS bolt and nut are available. Used in Small/Large Industrial Installations and large Sub-stations.

Contact Us: 0487 – 2970255, +91 9446724551

mail@excelearthings.com

Website: www.excelearthings.com